• Original product

UAV2 : CONTROLLER WITH INTEGRATED DISPLAY AND KEYPAD

uav2

Code: uav2

CONTACT US FOR MORE INFORMATION

  • SSL 100% secure website SSL 100% secure website
  • Fast shipping with national and international couriers Fast shipping with national and international couriers
Sito sicuro | Pagamento sicuro
Description UAV 2 is a complete and compact controller, equipped with I/O, integrated keypad and display, for diagnostic or data visualization.
Inputs/outputs are self protected and with self diagnosis, configurable and with the possibility to activate directly proportional solenoids. Equipped with a double microprocessor architecture, it can be used in system where EN13849 is applied.
Programmable in C language or IEC 61131, using VT3 Software Development Tool.

APPLICATIONS
- Compact controller for truck cranes
- Integrated controller for small compactors
- Genset and diesel engine controller
- Controller for hydraulic systems with many joysticks and/or switches
- Control system for small platforms
INPUTSOUTPUTSCONFIGURATIONNR. I/O
MULTIFUNCTIONAL INPUTS Software configurable 4
- Analog 0 - 25 mA, 10 bit
- Analog 0 - 5,5 V, 10 bit
MULTIFUNCTIONAL INPUTS Software configurable: 4
- Analog 0 - 25 mA, 10 bit
- Analog 0 - 30 V, 10 bit
MULTIFUNCTIONAL INPUTS Software configurable: 4
- Analog 0 - 5,5 V, 10 bit
- Analog 0 - 30 V, 10 bit
ANALOG INPUT - Analog 4 - 25mA, 10 bit 4
DIGITAL INPUT Software configurable: 4
- On/Off inputs High Side/Low Side
DIGITAL INPUT - On/Off inputs High Side 16
POWER OUTPUT Software configurable: 6
- ON/OFF: High Side, 2 A
- PWM: 50 - 500Hz duty cycle, 2 A
POWER OUTPUT Software configurable: 2
- ON/OFF: High Side, 2 A
- PWM: 50 - 500Hz duty cycle, 2 A, with feedback
MICROCONTROLLER MAIN CPU
Freescale 16 bit, 40 MHz
MICROCONTROLLER SECOND CPU
Freescale, 8 bit, 40 Mhz, used as Test Equipment
RAM MEMORY
12 KB
FLASH MEMORY
256 KB
EEPROM MEMORY
4 KB
FLASH MEMORY DATA LOGGER
256 KB
REAL TIME CLOCK RTC
YES, WITH ADDITIONAL 240 BYTES SRAM
PROGRAMMING MODE
Master or Slave mode CANOpen
PROGRAMMING LANGUAGE
C Language
SOFTWARE
IEC 61131 VT3 Development Tool
POWER SUPPLY VOLTAGE V
8 - 32V full operational, suitable for machine battery direct connection
COLD RANKING
5.5V without rest o ISO 7637- 2
IDLE CURRENT CONSUMPTION
80 mA @ 24V - 145 mA @ 12V
LOAD DUMP PROTECTION
3 A, 7 A peak
CAN BUS
2 CAN-bus, 2.0B high speed, 11 or 29 bit identifier ,ISO 11898-2 compliant, with or without termin
SERIAL PORTS
1 RS 232
STORAGE TEMPERATURE
From - 40 °C to +85 °C from - 40 °F to +185 °F
OPERATING TEMPERATURE
From - 40 °C to +70 °C from - 40 °F to +158 °F
SEALING IEC 529
IP66
HOUSING
CONTENITORE IN FUSIONE DI ALLUMINIO
CONNECTOR
1 X AMP 56 POLES AUTOMOTIVE
GORETEX VALVE
YES
DIMENSIONS MM
186 x 140 x 40 mm
WEIGHT
900 g
INSTALLATION
HORIZONTAL/VERTICAL, 4 SCREWS
EMC STANDARDS BY 89/336 CE CE MARK-EMC EMISSIONI/IMMUNITÀ
EN 61000-6-4 2006
EN 55011 RF Emission
EN 61000 - 6 - 2 2005
EN 61000 - 4 - 2 Electrostatic Discharge
EN 61000 - 4 - 3 Radio Frequency
EN 61000 - 4 - 4 Burst
EN 61000 - 4 - 6 Conducted disturbance
SAFETY STANDARD ACCORDING ISO 13849-1 MEAN TIME TO DANGEROUS FAILURE MTTFD
18,2
SAFETY STANDARD ACCORDING ISO 13849-1CATEGORY
2
SAFETY STANDARD ACCORDING ISO 13849-1 PERFORMANCE LEVEL PL
Up to D
APPLICATIONS
Components for access platforms telescopic - cranes
Telehandlers
Forklift trucks
Earth moving machines
Trucks tractors - trailers
Agricultural vehicles
Combines
Mixer wagons
Fire fighting - rescue vehicles
Camper & caravan
Motorcycles - quad components
Electric vehicles - golf cart
Can-bus boat global control system
Ambulances - emergency vehicles
Defense vehicles
uav2